Other

Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post. Compatible with: DIVINE

Fits: REVIVE/REVIVE 2.0, REVIVE MAX, and DIVINE Includes: - x1, Cable clamp body (# 52) - x1, M4 Set screw (# 7)

Service kit for 100 hr service (re-adjusting play and replacing wiper). This Service Kit 1 only fits posts that have: "Wiper without spring" There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version. To determine the correct service kit for your post, please copy this link into your web browser: https://www.bikeyoke.de/media/products/REVIVE%20service%20kit%20coding.pdf Kit includes: - 1x Wiper (no spring) - 6x Glide pin - 1x Lower bushing (grey, without line marking) - 1x Foam ring - 1x C-clip R12

Service kit for 100 hr service (re-adjusting play and replacing wiper). There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version. To determine the correct service kit for your post, please copy this link into your web browser: Kit includes: - 1x Wiper (with spring) - 6x Glide pin - 1x Lower bushing (grey, without line marking) - 1x Foam ring - 1x C-clip R12

Service kit for 100 hr service (re-adjusting play and replacing wiper). There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version. To determine the correct service kit for your post, please copy this link into your web browser: https://www.bikeyoke.de/media/products/REVIVE%20service%20kit%20coding.pdf Kit includes: - 1x Wiper (with spring) - 6x Glide pin - 1x Lower bushing (grey, with line marking) - 1x Foam ring - 1x C-clip R12

BikeYoke Sanguine is designed specifically for the use in BikeYoke seat posts. The formula reduces friction, ensuring fast action with minimal drag even in low winter temperatures below 0°C. Special additives help keep your post's o-rings and seals smooth and reduce wear. - Suitable for all BikeYoke dropper posts - Size: 250ml (lasts for several full services)

An extremely nice looking full aluminum headset topcap made in one piece. Laser engraved and then black anodized for a classy black in black matte/shiny finish. - Weight: Feathery 5g

This BikeYoke allows the use of a standard shock in your Specialized bike. Enduro 2017-2019 650b & 29" Includes: - 1x BikeYoke #7 (Y07) for low geometry setting with 210x55 shock (roughly -8mm BB and -0.5° HA) - 2x bearing - 1x DU bushing - 1x reducer - 1x stainless steel bolt

This BikeYoke allows the use of a standard shock in your Specialized bike. Stumpjumper 2016-2018 Turbo Levo 2016-2018 Includes: - 1x BikeYoke SJ02 - 1x DU bushing - 1x reducer - 1x stainless steel bolt

Designed to simplify thousands of hangers into one universal design that can be easily stocked by your local bike shop. Our hanger is uniquely forged and fully machined from aluminium giving you the toughest hanger possible. We always recommend having a spare to be sure of no missed rides. - Compatible with all frames designed to accept the SRAM UDH - Compatible with all MTB and E-MTB drivetrains - Forged and Fully Machined from 7075 Aluminium - Supplied with Mounting Screw and Washer - Thru Axle Pitch M12 x 1.0 Manufacturer’s part number: AC-DRHG-MTB-A4

Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. Dropout Bolt is also provided. Constructed from 7075 Aluminium and made to the manufacturer's exact specifications. Fits the following Santa Cruz bikes: - 5010 V1, V2, V3 - Bronson V1, V2, V3 - Nomad V2.1, V3, V4 - Chameleon V5, V6, V7 - Heckler V7 - Heckler E-Bike V8 - Heckler MX E-Bike - Bantam V1 - Blur TR V1.1 - Blur XC V2.2 - Blur LT V2.2, V2.1c - Blur V3 - Highball V1, V2, V3 - Tallboy LT V1.1 - Tallboy V1.1, V2, V3, V4 (MY20 & MY21 only) - High Tower V1 and V2(MY20 & MY21 only) - High Tower LT V1 - Mega Tower V1 - And Juliana Equivalents Exact Axle Length is 168.5mm x Thread M12 x 1.0mm pitch also fits other brands that use this size.

Pre-tension Bolt for Shimano Hollowtech II Cranks and Shimano E-bike motors. Simplify things with an 8mm fitting and add a splash of your favourite anodised color. Never worry about turning the garage upside down at midnight to find that little 'thingy' to pre tension your cranks ever again. - Remember this product needs minimal torque and do not exceed the manufacturers maximum recommended torque 0.7 to 1.5Nm - Suits: XTR, XT, SLX, LX, Deore, Saint & Zee cranks and bikes with a Shimano e-bike motor.

When you’ve got to finish your bike off right. The Burgtec Top Cap, Top Cap Bolt and Stem Spacers are the perfect finishing kit. Mix and Match to suit your bike. ***Top Cap only works with Burgtec Top Cap Bolt***

When you’ve got to finish your bike off right. The Burgtec Top Cap, Top Cap Bolt and Stem Spacers are the perfect finishing kit. Mix and Match to suit your bike. ***Top Cap only works with Burgtec Top Cap Bolt***

The elegant design of the Orbit Seatclamp is further enhanced by elaborate engravings and fits perfectly into the OAK product range. The enlarged clamping surface of the Orbit Seatclamp ensures that your Dopperpost is held securely and is particularly gentle on bearings and bushings. Includes: - Orbit Seatclamp - Seat clamp screw in black - Washer - Stickers (5 pieces)

Scratch Cover is the only DIY kit that allows you to remove any scratch on any stanchion: fork, air shock or dropper post. Developed specifically by SENDHIT for mountain biking, the Scratch Cover fork stanchion scratch repair kit restores the fork stanchion’s smooth appearance and keeps your suspension working properly. Every kit includes everything for 5 repairs: - 1 file to remove the burr - 5 ml bottle of resin and 3 ml bottle of hardener - 5 mixer tubes - 5 pipettes - 5 cleaning wipes - 1 sanding wedge - 10 sandpaper tabs - 1 pair of gloves - 1 polishing paste Please see the instructions or the Sendhit website for details on application: https://www.sendhit.net/products/scratch-cover

CNC machined 6061 aluminum Black anodized finish For Orbea 2020+ MTB frames with 12mm thru-axle. Includes fixing ring. Orbea: Hanger # 50/X160 Orbea Occam - 2020+ Rise - 2020+ Wild - 2020+

CNC machined 6061 aluminum Black anodized finish Attaches to frame with M4x12mm Flat Head Screw Storck: 16254-16, Argon 18: 38883 Argon 18 Aerfast.4 - 2021+ Aerfast3 - 2020+ E-117 Tri Disc - 2019+ E-118 Tri+ - 2019+ E-119 Tri+ - 2021+ Gallium Disc - 2018+ Gallium Pro Disc - 2018+ Gomera Ultra Disc - 2021+ Krypton - 2019+ Krypton Pro - 2019+ Nitrogen Disc - 2019+ Super Sport - 2020+

CNC machined 6061 aluminum Black anodized finish Thru Axle Thread Pitch M12x1.75 Santa Cruz: 04-16871, 23-15651 Includes DO nut 23-16458 Juliana Quincy 1 - 2022+ Santa Cruz Stigmata 2 - 2015-2019 Stigmata 3 - 2019-2023

CNC machined 6061 aluminum Black anodized finish Thru Axle M3x10mm Flat Head Screw Giant: 176M22G9917A1K Does not include axle nut. Giant Revolt Advanced 3 - 2022

CNC machined 6061 aluminum Black anodized finish Thru Axle Thread M12x1.0 Use without the B-Link when attaching Adds direct mount compatibility with Shimano mountain deraileurs to any SRAM UDH compatible frame. Optimized for Shimano Saint (RD-M820), Deore (RD-M610, RD-M5120, RD-M4120), Deore XT (RD-M8000, RD-M8050), SLX (RD-M7000-10, RD-M670), and Altus (RD-M2000). Retains ability of original SRAM UDH to rotate under impact to help protect the derailleur in the event of an impact.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Service parts for Fox suspension.

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Replacement piston and seals for Hope disc brake calipers.