Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Bottom Brackets

CeramicSpeed ITA Bottom Bracket for SRAM DUB Road
$359.00 - $459.00
The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design, while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The ITA for SRAM DUB Road comes in two bearing options. The first option is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second option is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: Italian BB - Opening diameter: Threaded - Shell width: 70mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet - Spacer tube
CeramicSpeed BB30 Bottom Bracket Road and MTB
$339.00 - $439.00
The BB30 bottom bracket allows you to pair 30mm spindle cranks to 42mm inner diameter bottom bracket shells. Cannondale pioneered this standard along with specially-designed cranks and many have found the benefits to them. Road versions have a 68mm width, MTB has 73mm. These are also the bearings you can use to replace bearings in PF30 cups. You have two bearing choices. The first choice is our low drag, long life Standard Bearing, with hardened-steel races and our super-round CeramicSpeed balls. The second choice is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. BB30 was designed to make the bike lighter: no cups, threading, or redundant metal, plus a lighter, stiffer crank. That's why the crank spindle is 30mm, which was a big jump up from square-taper spindles. CeramicSpeed standard bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. That's thanks to balls that are 100% smoother and 15% harder than the ceramic competition. The bearings last at least three times longer than other bearings. In The Box - 2x bearings - 2x 1mm spacers - 2x 0.5mm spacers - 2x dust covers - O-ring - 10ml syringe of grease - Sticker sheet
Easton Bottom Bracket 386/BBRight
$59.99
Bottom Brackets are an essential part of the bicycle that is often overlooked and forgotten, but we saw the BB as another opportunity for performance gains and improved efficiency. For our BB we have developed a seal that achieves a very low level of drag while still retaining excellent protection qualities. Its thinner and low viscosity bearing grease with the correct fill level offers higher durability at high speeds. If you're running the best crankset on the market, you should have the performance BB to match. - Thinner and lower viscosity bearing grease for higher durability at high speeds - In-house testing procedure includes developing a 24-hour continuous water invasion test - Offered in a variety of types for better compatibility - 386 EVO 46mm Press fit, 30mm Spindle, 103gm, 86.5mm
FSA Premium MegaExo Crank to PF86 Bottom Bracket
$38.00
FSA is proud to introduce the Premium Series, featuring high-quality headsets and bottom brackets meticulously designed to meet the demanding needs of today's bicycle constructors and customers. Precision CNC products and high-quality bearings are the key points of the brand new Premium Series, developed to reach better customer service and the highest level of performance. - Premium PF86 bottom bracket to suit road MegaExo 24mm cranksets - High-quality bearings for minimum friction and maximum durability - Precision CNC - Crankset standard: Mega Exo 24mm - Frame standard: PressFit86
Wheels Manufacturing Inc. 386EVO Angular Contact Bottom Bracket for 22/24mm SRAM Cranks
$120.00
Thread-together BB for 386EVO frames and 22/24mm diameter spindle cranks. Machined aluminum cups thread together for stability, increased bearing life, and simple installation and maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Drive Side Bearing: Enduro Angular Contact - Non-Drive Side Bearing: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: BB386EVO, BB392EVO - Bottom Bracket Shell Width (mm): 86mm – 92mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Diameter: 22/24mm stepped - Over Bearing Width: 91.8mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) - Weight: 145g
FSA MegaEVO-68mm Threaded Adapter Bottom Bracket
$54.99
- Enables the use of a MegaEVO (30mm spindle) crankset on a 68mm English threaded frame - Compatible with Gravity Gradient MegaEVO 30mm cranks
FSA BB30 Bearing Assembly
$49.99
- Road sets include bearings, shields, c-clips and wavy washer for bearing retention/tension - Mountain sets include bearings, shields, c-clips and spacer - Choose ceramic or stainless steel options
TruVativ Power Spline Bottom Bracket
$25.00
TruVativ Power Spline Bottom Bracket fits proprietary powerspline design popular as OE spec with many moderate-price TruVativ cranks. • Proprietary spline design popular as OE spec with many moderate-price TruVativ cranks • Crank bolts are included
Wheels Manufacturing Inc. T47 Outboard Angular Contact Bottom Bracket for 22/24mm Spindles
$120.00
T47 threaded BB cups for running 22/24mm stepped spindle (SRAM) cranks in T47 frames. Cups have outboard bearings and are typically used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, or a titanium-compatible anti-seize compound in titanium BB shells. - Bearings: Enduro Angular Contact (22/24mm SRAM non-drive-side bearing: ABEC-3) - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width: 68mm - 100mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Over Bearing Width: 91.2mm in 68mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16-notch
Wheels Manufacturing Inc. T47 Outboard Angular Contact Bottom Bracket for 24mm Shimano Spindles
$120.00
T47 threaded BB cups for running 24mm-spindle cranks in T47 frames. Cups have outboard bearings and are typically used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, or a titanium-compatible anti-seize compound in titanium BB shells. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width: 68 – 100mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Over Bearing Width: 91.2mm in 68mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16-notch
Shimano Ultegra Bottom Bracket
$31.99 - $38.99
Shimano's Ultegra bottom bracket uses Pro Tour-proven technology for lighter weight and super smooth spinning, while still maintaining the same level of durability and stiffness. It's available in English, Italian, or Press Fit models.
Campagnolo Chorus Cartridge Bottom Bracket
$71.99
Compatible only with Record or Chorus square taper cranks. Features three cartridge bearings and a chromoly steel spindle. - 3 sealed cartridge bearings, 2 on the drive side, 1 on the non-drive side - Removable cups are machined from 7000 series aluminum - Unique taper is not compatible with Shimano - Weight: 220 grams
CeramicSpeed BB86 Bottom Bracket for SRAM GXP
$359.00
The CeramicSpeed BB86 SRAM GXP Road Bottom Brackets are compatible with press-fit specific bike frames only. The shell diameter is 41mm ID, and when the bearings and cups are pressed in, they fit the 24/22mm SRAM and Quarq spindle. There are two versions of the CeramicSpeed Bearings that come installed in the cups. The first choice is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second choice is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. - This BB86 bottom bracket works with cranks that have 24/22mms, including Quarq and SRAM. - Frictional drag of CeramicSpeed Standard Bearings is typically 0.3-0.4 watts per set. That represents an average 75% drag drop versus standard bottom brackets. The hardened-steel races feature ceramic balls that are 100% smoother and 15% harder than the ceramic competition. The bearings last at least three times longer than other bearings. - Coated Bearings reduce drag further and increase service life. The coated races see a 50% drag reduction and an improvement in bearing life of 60%. In The Box: - 2 cups with bearings installed - 2 dust covers - 1mm spacer - 0.5mm spacer - GXP wave washer - Plastic cable protector - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet
Shimano BB-5500 Octalink V1 105 Bottom Bracket
$60.99
Compared to the power transfer of the conventional square taper spindle, the 8-splined OCTALINK interface that connects the bottom bracket and crankset increases the strength and rigidity for the entire assembly.
CeramicSpeed BB30 Bottom Bracket for SRAM DUB Road
$359.00 - $459.00
The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The BB30 for SRAM DUB Road comes in two versions; one using our CeramicSpeed Standard Bearings and the other using our Coated Bearings for even longer lifetime and lower friction. Compatible with: - Frame: BB30 - Opening diameter: 42mm - Shell width: 68mm - Bottom Bracket Tool for installation: BBT-79 In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker Sheet
CeramicSpeed PF30 Bottom Bracket for SRAM DUB Road
$359.00 - $459.00
The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The PF30 for SRAM DUB Road comes in two versions. One version uses our low-drag, long-life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second version uses our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: PF30 - Opening diameter: 46mm - Shell width: 68mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - Spacer-tube - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet
Race Face Cinch Bottom Bracket Spacer Kit OSBB
$12.99
Race Face Cinch bottom bracket spacer kit of OSBB bottom brackets.
Race Face SRX ISIS Bottom Bracket
$37.99
Race Face SRX ISIS bottom brackets feature 6061-T6 aluminum cups, high-pressure axle seals, adjustable chainline and M15 spindles. • Features 6061-T6 aluminum cups, high-pressure axle seals, adjustable chainline and M15 spindles • Requires ISIS installation tool
Wheels Manufacturing Inc. BB30 Outboard ABEC-3 BB
$74.00 - $99.00
The Wheels Mfg BB30 Outboard bottom bracket will give you all of the same benefits as their other Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in BB30 frames without the need for adapters. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 130g
Wheels Manufacturing Inc. PF30 Threaded Angular Contact Bottom Bracket
$120.00
PF30 Threaded bottom bracket features two machined aluminum cups that thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Directly replaces all OEM PF30 bottom brackets. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB, BBRight™ Press Fit - Bottom Bracket Shell Width (mm): 61mm to 79mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 115g
Wheels Manufacturing Inc. BB30A Outboard Angular Contact Bottom Bracket for 22/24mm SRAM Cranks
$120.00
The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life and simplifying maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Bearings: Enduro Angular Contact (22/24mm SRAM non-drive-side bearing: ABEC-3) - Color: Black - Bottom Bracket/Frame Interface: Cannondale BB30A - Bottom Bracket Shell Width: 73mm - Bottom Bracket Shell I.D.: 42mm - Over Bearing Width: 91mm in 73mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16 notch
Wheels Manufacturing Inc. BB30 Outboard Zerø Ceramic Bottom Bracket
$204.00
The Wheels Mfg BB30 Outboard bottom bracket will give you all of the same benefits as their other Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in BB30 frames without the need for adapters. - Bearings: Enduro ZERØ Ceramic - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 122g
Wheels Manufacturing Inc. PF30 Outboard Zerø Ceramic Bottom Bracket
$204.00
The Wheels Mfg PF30 Outboard bottom bracket will give you all of the same benefits as their well-loved Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in PF30 frames without the need for adapters. - Bearings: Enduro ZERØ Ceramic - Color: Red - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 156g
Wheels Manufacturing Inc. PF30 Outboard ABEC-3 Bottom Bracket
$99.00
The Wheels Mfg PF30 Outboard bottom bracket will give you all of the same benefits as their well-loved Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in PF30 frames without the need for adapters. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 161g
CeramicSpeed BB86 Bottom Bracket for SRAM DUB Road
$359.00 - $459.00
The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed Bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. You have two bearing choices. The first choice is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second choice is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: BB86 - Opening diameter: 41mm - Shell width: 86.5mm In the box: - 2 CeramicSpeed Bearings - 2x dust covers - Plast-sheet - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker Sheet
Problem Solvers Bushnell Fat Bike Eccentric Bottom Bracket
$150.00
The Problem Solvers Bushnell Eccentric Bottom Bracket is the industry leading design for chain tension adjustment on tandem and dedicated single speed bikes equipped with eccentric bottom bracket shells. The classic version features full-body, aluminum construction across the shell for maximum surface area friction and additional value. The Bushnell Fat Bike Eccentric Bottom Bracket is designed for the 100mm shells in most fat bikes. - Accepts English threaded bottom bracket cups - Classic, full-body design - Diameter of part - 2.118 inches (53.78mm) - Fits BB shells from 53.8 ~ 54mm I.D. without shim - Fits BB shells up to 100mm width
Wheels Manufacturing Inc. T47 Outboard ABEC-3 BB for 29mm SRAM DUB Compatible Cranks
$99.00
T47 threaded BB cups for T47 frames and 29mm spindle diameter SRAM DUB compatible cranks. Cups have outboard bearings and can be used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bottom Bracket Includes: - BB Cups with bearings - 2x Silicone dust seals - 2x 0.5mm crank spindle spacers - 2x 1.0mm crank spindle spacers - 1x 2.5mm crank spindle spacer Specifications: - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width (mm): 68mm - 100mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Crank Spindle Diameter: 29mm - Over Bearing Width: 90.8mm in 68mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Tool Pattern: 48.5mm x 16-notch - Weight: 155g Compatible with the following Bottom Bracket Standards (47x1.0mm Threaded BB shell) and 29mm diameter spindle SRAM DUB compatible cranks: - T47 shell with a width of 68mm and SRAM DUB Road Crank - T47 shell with a width of 73mm and SRAM DUB MTB Crank - T47 shell with a width of 100mm and SRAM DUB Fatbike Crank
CeramicSpeed EVO386 Bottom Bracket for Shimano
$359.00
The EVO386 standard is designed for oversized spindles. CeramicSpeed's kit for Shimano allows you to install Shimano or FSA cranks with 24mm spindles. The cups come with CeramicSpeed Bearings installed. Both CeramicSpeed Standard and Coated Bearings are available. Both utilize super smooth CeramicSpeed Balls and hardened-steel races. The latter has an additional metallic coating on the races to further smooth and harden the steel, further increasing life and lowering drag. The design of overlapping cups extending through the shell for EVO386 reduce the likelihood of creaking and increase the reliability of the system. The CeramicSpeed Standard Bearings feature an average drag reduction of 75% compared to stock bottom brackets. That translates into frictional drag of 0.3-0.4 watts per set, which is the result of great design, hardened-steel races, and ceramic balls that are 100% smoother and 15% harder than the ceramic competition. The CeramicSpeed Coated Bearings are a step up as they reduce drag by 50% compared to our Standard Bearings and an improvement in bearing life by 60%. All Round Grease comes standard in the bearings, but can be replaced for lower drag TT and Track Grease or higher durability LongLife Grease, which adds a bit of drag but stays in the bearing when riding through messy conditions. In The Box: - 1 bottom bracket with bearings installed - 2 dust covers - 10ml syringe of All Round Grease - Sticker Sheet
Easton Bottom Bracket
$49.99
Tech specs: - BSA: 91g - PF30: 117g - BB86: 66g - BB386: 103g
FSA MegaExo Stainless Fatbike Bottom Bracket
$59.00
- Die Cast then CNC-machined alloy bearing cups - Composite DI2 compatible adjustable center sleeve - 100mm for Fat Bikes - For use with 100mm MTB NBD MegaExo cranksets - Spindle Interface Type: FSA MegaExo - BB Shell Width (mm): 100 - Bottom Bracket Shell I.D.: 1.37 - BB/Frame Interface: English
Page 1 of 6 Next page