Tubes: All Sizes/Types

- ISO Diameter: 622 / road / 29" - ISO Width (mm): 23 mm , 24 mm , 25 mm - Labeled Size: 700c x 23-25 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 125g (32mm), 126g (48 & 60mm), 128g (80mm)

The name Airstop says it all. Michelin's Airstop tubes use a proprietary butyl rubber so your tires keep their pressure longer. And, the reinforced valve stem seam is ultra sturdy, too. - 98g - 52mm valve length

Our Standard Presta Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smooth, ride after ride.

Because it's hard to know when you're going to get a flat, it's always good to have extra tubes on hand. Specialized's Turbo Ultralight MTB Tube w/Talc is lightweight to save rotational weight. The Talc lets the tube move easier inside the tire for a better ride with fewer flats.

When building your featherweight dream bike, don't forget the tubes! MICHELIN's Aircomp Ultralight tubes are nearly weightless for minimum rolling resistance and maximum speed.

- ISO Diameter: 340 , 349 / 16" recumbent - ISO Width (mm): 35 mm - Labeled Size: 16 x 1-3/8 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 84g

Minimum weight and maximum protection: Tubo-MTB-Plus tubes are optimized for tire widths from 2.5" to 3.0", today’s standard for E-MTBs. Their low weight of 105g (for 27.5+) increases your battery life, and they're also a lightweight alternative to tubeless setups. - 42mm valve length

- Low Lead Valve - ISO Diameter: 305 / 16" BMX - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 76g (1.25-1.5), 92g (1.5-1.75), 102g (1.75-2.125)

Aim higher: at 54% lighter, 2x more puncture-resistant, and 50% smaller packed size compared to standard rubber tubes, Tubo-BMX tubes jump to new heights. - 40mm valve length

- ISO Diameter: 622 / road / 29" - ISO Width (mm): 48 mm , 49 mm , 50 mm , 51 mm , 52 mm , 53 mm , 54 mm - Labeled Size: 29 x 1.9-2.3 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 226g

- ISO Diameter: 622 / road / 29" , 630 / 27" - ISO Width (mm): 18 mm , 19 mm , 20 mm , 21 mm , 22 mm , 23 mm - Labeled Size: 700c x 18-23 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 100g (32mm), 101g (48mm & 60mm), 103g (80mm)

- ISO Diameter: 622 / road / 29" - ISO Width (mm): 28 mm , 29 mm , 30 mm , 31 mm , 32 mm - Labeled Size: 700c x 28-32 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 128g (32mm), 129g (48 & 60mm)

- ISO Diameter: 438 , 451/ 20 x 1-1/8", 20 x 1-1/8" - ISO Width (mm): 28 mm , 29 mm , 30 mm , 31 mm , 32 mm , 33 mm , 34 mm - Labeled Size: 20 x 1-1/8 - 1-3/8 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 98g

Even lighter, even more compact, and ideal as a spare, the S-Tubo-MTB tubes were developed to have a minimum possible packaging size. With a removable valve stem, the tubes have a size of only Ø3.5cm x 5cm height when packaged. The puncture resistance is the same as with standard butyl rubber tubes but with a weight of only 45g (for 29"). - 42mm valve length

Super light at only 38g, the Tubo-ROAD-700c makes racing bikes even lighter. It's 70g lighter compared to a standard tube, a decisive success factor both over challenging long distances and when it comes to seconds. Suitable for disc and rim brake wheels.

- ISO Diameter: 571 / 650c - ISO Width (mm): 18 mm , 19 mm , 20 mm , 21 mm , 22 mm , 23 mm - Labeled Size: 650c x 18-23 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 80g (32mm), 86g (48m & 60mm), 88g (80mm)

- ISO Diameter: 559 / 26" mtn - ISO Width (mm): 25 mm , 26 mm , 27 mm , 28 mm , 29 mm , 30 mm , 31 mm - Labeled Size: 26 x 1-1.25 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 96g

The least expensive way to ditch 40+ grams of rotating weight is with our Turbo Talc Tubes. A patented, oversized 4.8cm valve base prevents tearing, while a partially threaded valve stem provides a clean interface with pumps. Our lightest and most supple tube offering, it's also been proven in rolling-resistance testing to reduce drag by as much as 13% per wheel. - Packed in talc for easier installation. - 4.8cm valve base prevents issues of valves tearing off. - Smooth at the top for easier pump head insertion and reduced wear on pump internals. - Thinner tube design saves approximately 40 grams of rotating weight. - Thickness: 0.6mm

We all love to stop and smell the roses, but like they say, every rose has its thorn. And as we all know, there's no better way to ruin a beautiful ride than with a thorn in the tube. No need to worry, though, because we designed our Thorn-Resistant Schrader Valve Tubes to combat pesky pricks of all shapes and sizes. Starting at the basis of the construction, we designed the tube to be thicker at the outer side (the part against the tire) in order to stop pesky bits from puncturing all the way through the tube. Then, at the inner side (the part against the rim), it's actually thinner in order to reduce weight. This way, you don't have to sacrifice performance in the name of protection. - Thicker construction on the outer side (against the tire) enhances puncture protection. - Thinner construction on the inner side (against the rim) maximizes weight savings.

Because it's hard to know when you're going to get a flat, it's always good to have extra tubes on hand. Specialized's Turbo Ultralight Road Tube w/Talc is lightweight to save rotational weight. The Talc lets the tube move easier inside the tire for a better ride with fewer flats.

We're not afraid to say it—our Airlock Schrader Valve Tubes are the best performing, self-sealing bicycle tubes available. That's because they feature our powerful Airlock sealant that coats the tube for permanent protection against punctures. Not only this, but the sealant is designed to work continuously in order to prevent slow leaks from occurring, so erring complete catastrophe, you won't have to worry about flatting when you're riding over debris. We even addressed the common issue of sealant pooling with a completely homogenous design, so the tire/tube combo will always roll smooth and even. - Airlock sealant for the best chance of reducing punctures. - Non-toxic, non-separating formula. - Works continuously to prevent slow leaks. - Homogenous design prevents puddles with no need to shake. - Will not dry out like the many other sealants.

Our Standard Schrader Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smooth, ride after ride. - Individually cured for consistent tube thickness = the utmost in quality.

Your little ones have a youthful, intrepid spirit that sees them riding wherever the wind takes them. Most of the time, however, it takes them straight through thorns and debris, leaving you with the unenviable task of changing out flat after flat. But with our Standard Schrader Valve Youth Tubes, you'll have the peace of mind that they're riding on tough tubes that are built strong to last. And to make sure of it, they feature a molded method of construction that ensures a consistent thickness of butyl rubber— meaning that they'll roll smooth and stay tough, ride after ride. - Consistent thickness for the utmost in quality. - 32mm Schrader valve

We're not afraid to say it—our Airlock Presta Valve Tubes are the best performing, self-sealing bicycle tubes available on the market. That's because they feature our powerful Airlock sealant that coats the tube for permanent protection against punctures. Not only this, but the sealant is designed to work continuously in order to prevent slow leaks from occurring, so erring complete catastrophe, you won't have to worry about flatting when you're riding over debris. We even addressed the common issue of sealant pooling with a completely homogenous design, so the tire/tube combo will always roll smooth and even. - Airlock sealant for greater protection. - Non-toxic, non-separating formula. - Works continuously to prevent slow leaks. - Homogenous design prevents puddles.

- ISO Diameter: 520 / 24" mini bmx - ISO Width (mm): 29 mm - Labeled Size: 24 x 1-1/8 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 92g

- ISO Diameter: 406 / 20" BMX - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 92g (1.25-1.5), 118g (1.5-1.75), 132g (1.75-2.125)

- ISO Diameter: 622 / road / 29" - ISO Width (mm): 23 mm , 24 mm , 25 mm - Labeled Size: 700c x 23-25 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 92g (32mm), 94g (48mm), 96g (60mm), 98g (80mm)

- Size: 32 x 2.125 - Valve Type: Schrader - Valve Length: 32mm - Valve Stem: Smooth - Valve Core: Removable

Continental tubes are made of seamless butyl rubber and are individually tested for top quality. 42mm valve: 95 grams 60mm valve: 100 grams

- ISO Diameter: 520 / 24" mini bmx - ISO Width (mm): 25 mm , 26 mm , 27 mm , 28 mm - Labeled Size: 24 x 1-1/8 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 80g (32mm), 82g (60mm)