Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

Wahoo Blue SC Speed/Cadence Sensor (BT/ANT+)
$59.99
The Wahoo BlueSC speed and cadence sensor transforms your phone into a powerful cycling computer. Using Bluetooth Smart and ANT+ technology, it tracks cycling speed, cadence, and distance which can be paired with your favorite cycling app including Strava and Zwift, or paired to your bike computer. It's weatherproof, small with a low drag profile, and comes with a rubber band and zip tie mounts. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and GPS devices. - No tangled wires on your bike to connect the sensor to your device. - Provides accurate speed data during your ride - Provides accurate cadence data during your ride - BlueSC comes with a rubber band mount and zip tie mount. - The Blue SC sensor will fit with most bikes and frame sizes
Wahoo RPM Cadence Sensor (BT/ANT+)
$40.00
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes
Specialized Turbo Pedal Assist Battery Charger
$199.99
Charge your Specialized Turbo battery with this high output, custom Li-ion charger. • Custom Specialized Li-ion battery charger • Output: 42V4A • Compact design while delivering huge power • With Rosenberger plug and light indication of the charging status
K-Edge Garmin XL Mount
$49.99 - $55.00
The Garmin XL Computer mount is K-Edge's next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer, specifically designed to accommodate the EDGE 1000, 810 and 800, also compatible with the smaller Edge models like 520, 510, 500, in addition to the Forerunner and Touring models. Their advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that K-Edge's replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. K-Edge provides free replacement inserts, as needed. Attributes (specs): - CNC Machined 6061 T6 Aluminum - Compatibility – 31.8mm and 35mm diameter handlebars - New clamp design is hinged for ease of installation - Supported Computers – Garmin Edge 1000, 810, 800. Also compatible with new Garmin Edge 520, Edge 20 and Edge 25 models, in addition to Forerunner and Touring models. - Combo Compatible – Add the Action Camera Adapter or the complete Combo Mount for the added benefit of using both a computer and GoPro style interface action camera or
GoPro Sportsman Mount
$70.00
Mount your GoPro to guns, fishing rods, and bows. This versatile mount is compatible with most shotguns, rifles, revolvers, airsoft, paintball, and pellet guns, and fits bow components and fishing rod grips with a diameter of 0.4” to 0.9” (10mm to 23mm). You can mount one or two cameras front-facing and/or rear-facing to capture immersive footage from a variety of angles and perspectives. A non-reflective, matte black finish ensures low visibility. Fits 0.4" to 0.9" (10mm to 23mm) diameter gun barrels, fishing rod grips, and bow components.
GoPro Auto Charger
$30.00
Perhaps the best time to charge your GoPro camera is in transit, and with GoPro's Auto Charger, you can make the most of the commute to your adventure. The dual USB port quickly charges two cameras at once, and you can even record while you charge. The kit includes 2 USB cables so you can charge multiple cameras, and it even works with most devices that charge via USB.
Electra Handlebar Camera Mount
$40.00
Snap photos and capture video while you ride with Electra's Handlebar Camera Mount. It clamps to your handlebars and sports a handy folding arm that makes adjusting the tightness and angle of the mount a breeze.
GoPro Dual Battery Charger + Battery (for Hero4)
$70.00
Conveniently charge your HERO4 camera batteries with the Dual Battery Charger, the only GoPro charger that allows you to charge two HERO4 batteries simultaneously. Featuring USB compatibility, you can power it with most standard USB power adapters, the GoPro Wall or Auto Charger, or a computer. Dual LED indicator lights display the charging status, so you know when your batteries are ready for action. Includes a spare 1160mAh lithium-ion rechargeable battery for your HERO4 camera. • Conveniently charges two HERO4 camera batteries simultaneously • Can be powered with most standard USB power adapters, the GoPro Auto or Wall Charger, or a computer • Dual LED lights display charging status of both batteries • Includes a spare 1160mAh lithium-ion rechargeable battery for your HERO4 camera
K-Edge Combo Mount Interface
$19.99
Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000. - Camera Adapter mount with GoPro style interface - Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560) - Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer. - Centers camera in out of site position - Improves video clarity by removing plastic mount shake - Colors: Anodized Black - Weight: 14grams *Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.
Quarq ShockWiz
$329.00
ShockWiz is a suspension tuning system for air-sprung mountain bikes that combines high-tech hardware with an intuitive smartphone app. It's lightweight, durable and powered by a long-lasting coin cell battery, ShockWiz automatically records and evaluates suspension performance every time you ride. The ShockWiz app displays straightforward adjustments that unite bike, terrain and riding style. ShockWiz works for all mountain bike riders, regardless of their experience or bike's intended use. It works on hardtail and dual suspension bikes, and for all levels of skill, speed, and terrain. With ShockWiz, you know exactly how your suspension is performing – and how to make it better. Features & Benefits: - Automated tuning recommendations - Shock tuning score - a snapshot of how well your suspension is set up for you - Works on hardtail and dual suspension bikes. Works for Cross-Country, Trail, All Mountain and Downhill. - Inexpensive, replaceable CR2032 battery lasts for months - Waterproof and dustproof - IP67 rating - Two alternative hoses (included) offer a range of fitting options - Smartphone app is compatible with Apple and Android phones Essential Details: - ShockWiz is designed for all mountain bike riders, regardless of your experience or bike's intended use. - You can tune for every riding style: Efficient (pedaling), Balanced, Playful or Aggressive. - Advice for air pressure, spring rate, compression and rebound is displayed in the intuitive smartphone app. - In the box: ShockWiz hardware, two hoses, rubber mounting boot and zip ties.
Quarq ShockWiz Spares - Cap and Mounting Boot
$35.00
Spare parts for Quarq's ShockWiz automated suspension tuning device. - Contains a rubber mounting boot, four zip ties, plastic cap and two o-rings.
Profile Design UCM XL Universal Computer Mount 60mm
$9.99
Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
Lezyne GPS Bar/Stem O-Ring Mount
$6.99
Each GPS unit comes with a Standard GPS Mount. Included are two sets of o-rings (two diameters), plus a backup o-ring in each size, a rubber shim and an X-Lock composite mounting bracket. The rubber shim supports the X-Lock mount which is engineered to attach at any 9° angle and still allow the computer to be mounted forward. The two super durable o-rings secure it to the bar, and the patent-pending X-Lock design will prevent the computer from being knocked out. The X-Lock securely fastens the GPS computer to the mount by pressing down at a 45° angle and rotating it forward until it "locks" into place.
K-Edge Go Big Pro Handlebar Mount for GoPro
$59.99
- CNC-machined professional grade aluminum camera mounts for Go Pro cameras - Lock the camera case on to either your handlebars or seat rails depending on model - Greatly reduces camera shudder and improves video images - Powerful clamping via all metal bolt/mount system for 31.8mm diameter handlebars on handlebar mounts - 1/4" mount provides a solid platform for any camera that has a standard 1/4" interface - Lifetime warranty, made in the USA
SRAM RED eTap Bar End Clic Shift Buttons
$120.00
- Shift buttons mounted to the end of a bar plug - Included wire connects to Blip Box - Fits bars with 19 - 20.5mm inside diameter
Garmin Silicone Case (Edge 1030)
$19.99
Protect your Edge 1030 with this form-fitting, removable silicone case.
Garmin Running Dynamics Pod
$69.99
Computes and Transmits Meaningful Data - Computes and sends 6 running dynamics metrics to your compatible device - Battery life: replaceable battery lasts up to 1 year (assuming 1 hour daily use) - Automatically turns itself on and off - Tiny size: at less than 0.5 ounces, you'll forget it's there - Compatible devices connect with the Garmin Connect Mobile app to automatically sync your data and connect with others Train Hard, Run Free The Running Dynamics Pod easily clips onto your waistband to measure the running dynamics you need to beat yesterday. It gives you the option to run without a heart rate monitor chest strap. Once paired with your compatible smartwatch, just clip it to the back and center of your waistband and start your run. Review Your Form View and analyze important running metrics such as your cadence, stride length, ground contact time and balance, vertical oscillation and vertical ratio. These biomechanical measurements can help you understand your running form so you can perform better on race day. How It Works: The Running Dynamics Pod has an accelerometer in the module that measures torso movement to calculate these 6 running metrics: - Cadence is the number of steps per minute. It displays the total steps (right and left combined). - Ground contact time balance displays the left/right balance of your ground contact time while running. It displays a percentage. For example, 53.2 with an arrow pointing left or right. - Stride length is the length of your stride from 1 footfall to the next. It is measured in meters. - Vertical oscillation is your bounce while running. It displays the vertical motion of your torso, measured in centimeters for each step. - Vertical ratio is the ratio of vertical oscillation to stride length. It displays a percentage. A lower number typically indicates better running form. - Ground contact time is the amount of time in each step that you spend on the ground while running. It is measured in milliseconds.
Garmin Edge Mountain Bike Mount
$39.99
Be ready for any terrain with this Garmin Edge mountain bike mount designed specifically for bikes with short stems. It’s ideal for off-road riding when you may not want your Edge bike computer mounted in front of your handlebar.
SRAM eTap AXS BlipBox
$385.00
Significantly smaller, the SRAM eTap AXS BlipBox is now easier to integrate — mounting inside a stem faceplate cap, feed box, or frame. It's also AXS enabled, for easy personalization. Simple, intuitive, aero. - Replaces standard drop bar shift levers - Simple and intuitive eTap shift logic - AXS enabled for easy personalization - Limitless aero configurations - Two ports per side for Blips - Fits the included optional stem mount - Compatible with existing eTap Blips and Clics - Mounts inside stem faceplate cap, feed box or frame
ENVE Wahoo Computer Mount Insert
$5.00
What It Is Wahoo insert for an existing ENVE Computer mount. Who It's For Wahooligans, as Wahoo owners affectionately call themselves. Those who want to run ENVE's stem and computer mounting system, but own a Wahoo computer, now have an option. Why We Made It Data is what we crave in every aspect of what we do. Numbers, stats, KOMs – we want to collect them all, just like you. We also recognize that not everyone has the same computer. Providing options for all different types of computers was a simple solution. Wahooligans celebrate — ENVE is now compatible. - Computer mount sold separately
K-Edge Garmin Mount
$49.99 - $54.99
This is K-Edge's next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer. Their advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that the replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. - CNC Machined 6061 T6 Aluminum - Compatibility – 31.8mm and 35mm diameter handlebars. - New clamp design is hinged for ease of installation. - Supported Computers – Most Garmin Edge, Forerunner, and Touring models, including the new Garmin Edge 520, Edge 20 and Edge 25 models (Edge 1000 - fits on the longer XL mount) - Combo Compatible – versions available that support GoPro style interface action cameras and lights - Weight – (31.8 mm) Standard Mount 45.4 grams; Combo Mount 55.4 grams Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. *TheNEW K-EDGE Handlebar Computer and Camera Mounts (1420, 1440, 1500, 1505, 1605, and 1905 series) are built in three parts. An integral part of our mounts are the connection where the arm and clamp are joined by two assembly bolts located on the underside of the mounts. THESE ASSEMBLY BOLTS ARE NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Garmin EDGE instructions that recommend use of the provided tether leash.
Garmin Silicone Case (Edge 820)
$14.99
Protect your Garmin Edge 820 (sold separately) with a form-fitting, silicone case and keep your mind at ease. Choose from a variety of cool colors to match your personal style.
Garmin Cadence Sensor 2
$39.99
Monitor your pedaling cadence as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes. Simply attach the sensor and ride. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes.
K-Edge Garmin XL Combo Mount
$64.99
The Garmin XL Combo mount is K-Edge's next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer and GoPro compatible cameras & lights, specifically designed to accommodate the EDGE 1000, 810 and 800, also compatible with the smaller Edge models like 520, 510, 500, in addition to the Forerunner and Touring models. Their advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that the replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. K-EDGE provides free replacement inserts, as needed. - CNC Machined 6061 T6 Aluminum - Compatibility: 31.8mm and 35mm diameter handlebars - New clamp design is hinged for ease of installation - Supported Computers: Garmin Edge 1000, 810, 800. Also compatible with new Garmin Edge 520, Edge 20 and Edge 25 models, in addition to Forerunner and Touring models. - Camera Interface: GoPro style interface for compatible action cameras or lights
K-Edge Sigma ROX 10.0 Combo Mount
$64.99 - $69.99
Professional handlebar mount for Sigma ROX 10.0 GPS Computer and GoPro type interface. - Combination GPS computer and GoPro, Garmin and Shimano camera mount - Hinged clamp for easy installation - Precision machined, anodized 6061 T6 aluminum - Slim clamp area reduces handlebar footprint - Short boom moves computer and camera in front of handlebars - Lifetime Warranty - Made in USA
K-Edge GO BIG Pro Saddle Rail Mount (1/4x20)
$64.99
The K-Edge Universal Camera 1/4-inch-20 Pro Saddle Rail Mount provides a rock-solid platform for any camera to capture the unique angle of a trailing rider. Use the 1/4-inch-20 (tripod) mount for almost every camera, including: Garmin, SONY, Contour, Drift, Rollei. Or remove this adapter and use the base GoPro mount for all Hero cameras. - CNC machined aluminum mount with solid locking system - Universal Camera Mounting system fits almost every seat rail - Designed and produced to confidently lock your camera in place - Solid design and precision fit to securely lock camera and improve footage - Compatibility: Go Big Saddle Rail Mount, mated to 1/4-inch-20 threaded (tripod) interface adapter gives you one mount that will work for any camera. - Material: CNC machined 6061-T6 Aluminum, Stainless Steel 1/4-inch-20 Thumbscrew - Fitment: Camera can be mounted above or below the mount - Weight: 58 grams - Made in Boise, Idaho, USA
K-Edge Adjustable Garmin Stem Mount
$40.00
The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The adjustable version allows for a variety of different stem angles. Can be used with positive or negative degree stems and additional spacers can be added (5mm to 10mm) above the stem. Note that some of the larger computers will not always work with a steep angled stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer.
K-Edge TT Mount for Garmin Computers
$64.99
The K-EDGE Garmin TT Mount is the most advanced Time Trial and Triathlon computer mount available. Featuring a twist-lock mechanism to lock your Garmin with confidence. The K-EDGE Garmin TT Mount’s aluminum design and its unique locking feature is by far the most advanced mount on the market. With traditional TT mounts for the Garmin computer, you have to either have enough room between the extensions to perform the ¼ turn “twist” or the computer has to be mounted above the extensions. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility – 22.2mm diameter TT Extensions - Supported Computers – Garmin Edge 20, 25, 200, 500, 510, 520*, 800, 1000, and Forerunner 310XT - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded. *Garmin 520 is not compatible at this time.
Minoura SGS-400-OS Clamp
$18.99
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter
K-Edge Go Big Thumb Screw
$9.99
Hand tight adjustability and 4mm hex wrench lockable. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility: Combo Mounts, Light&Camera Mounts. - Aluminum knurled thumbscrew - Stainless Steel bolt with 4MM hex feature - Weight: 10g - Anodized Color: Black - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacturer defects. Damages due to abuse or crashing excluded
Page 1 of 5 Next page